联系我们

凤凰娱乐市东昊锻造有限公司

联系人:黄经理

电话:+639277308203

手机娱乐:+639277308203

地址:凤凰娱乐市南市区朱庄工业区

行业新闻
锻件为什么要正火处理
正火,又称常化,是将工件加热至Ac3或Accm以上30~50℃,保温一段时间后,从炉中取出在空气中或喷水、喷雾或吹风冷却的金属热处理工艺。其目的是在于使晶粒细化和碳化物分布均匀化。正火与退火的不同点是正火冷却速度比退火冷却速度稍快,因而正火组织要比退火组织更细一些,其机械性能也有所提高。另外,正火炉外冷却不占用设备,生产率较高,因此生产中尽可能采用正火来代替退火。⑥用于球墨铸铁,使硬度、强度、耐磨性得到提高,如用于制造汽车、拖拉机、柴油机的曲轴、连杆等重要零件。目的是降低硬度,改善切削加工性;消除残余应力,稳定尺寸,减少变形与裂纹倾向;细化晶粒,调整组织,消除组织缺陷。
Normalizing, which is also called normalizing, is a metal heat treatment process that is heated to Ac3 or more than Accm at 30~50 C. After a period of heat preservation, it is removed from the furnace in the air or by water spray, spray or blow cooling. The aim is to refine the grains and homogenate the carbide distribution. The difference between normalizing and annealing is that the normalizing cooling rate is slightly faster than that of annealed cooling, thus the normalizing tissue is finer than the annealed tissue, and its mechanical properties are also improved. In addition, the cooling outside the normalizing furnace does not occupy the equipment and has higher productivity. Therefore, normalizing is used instead of annealing as far as possible during the production. It is used for ductile iron to improve hardness, strength and wear resistance, such as crankshaft, connecting rod and other important parts for automobile, tractor, diesel engine. The aim is to reduce the hardness and improve the machinability, eliminate the residual stress, stabilize the size, reduce the deformation and crack tendency, refine the grain, adjust the structure and eliminate the defects of the tissue.
  1. 联系人:黄经理
  2. 电话:+639277308203
  3. 手机娱乐:+639277308203
  4. 网址:www.moduanjiann.com
  5. 地址:凤凰娱乐市南市区朱庄工业区

版权 ? 凤凰娱乐市东昊锻造有限公司 网址:www.moduanjiann.com 推荐:模锻件,精密模锻件加工,汽车模锻件,电梯模锻件  网站制作:凤凰娱乐遨游公司